Built on a Hillside, Dug Accordingly
We provide excavation, land clearing, site prep and drainage across Mission, and most of it involves a slope. Mission climbs from the Fraser River up the mountainside, which gives the city its views and gives its excavation work a character no valley-floor town shares: building sites benched into hillsides, driveways cut to grades a car can actually climb in the rain, retaining walls holding back the hill, and water management on every single job, because everything uphill drains through everything downhill.
Beyond the urban slope, Mission's rural districts are classic acreage country: Stave Falls, Steelhead, Silverdale, Hatzic and Dewdney, with hobby farms, forested parcels and properties that mix flat usable ground with steep treed backs. Out there our work looks like the rest of the valley, clearing, trenching, pads and gravel driveways, with the hillside toolkit ready for the moment the ground tilts.
Services in Mission
- Excavation & Site Prep: Lot grading, building pads and foundation excavation for new homes, shops and garages across the valley.
- Land Clearing: Brush, stumps and overgrowth cleared from acreages and building lots, with chipping and haul-away disposal.
- Trenching & Utility Lines: Clean, to-depth trenches for water, power, gas and drainage lines, dug after BC 1 Call locates are in.
- Drainage & Ditching: Perimeter drains, French drains, ditching and culverts that move Fraser Valley rain away from buildings and fields.
- Driveways & Gravel Prep: New gravel driveways, parking pads and driveway rebuilds, from subgrade excavation to compacted crush.
- Retaining Wall Excavation: Cut, bench and prep for lock block, boulder and segmental walls on sloped lots, including drainage behind the wall.
- Small Demolition & Removal: Garages, sheds, mobile homes, concrete slabs and old driveways demolished, loaded and hauled away.
The Hillside Toolkit
- Benched building sites: the site is cut in steps into the slope so fill keys into solid ground, giving a stable platform instead of a wedge of loose material waiting for a wet winter. See site prep.
- Driveway cuts with drainage: route selection, benching, cross-culverts and armoured pitches so steep driveways shed water sideways instead of carrying their own gravel to the bottom.
- Retaining wall excavation: cuts, compacted bases, drain rock and piped outlets for lock block, boulder and segmental walls, built to engineered drawings when height or surcharge requires it.
- Slope drainage: interceptor French drains above building sites, downspout and sump runs to safe discharge, and the grading that keeps uphill water moving around your home instead of through it.
- Rock work: parts of Mission sit on shallow rock; we plan for it honestly, hoe-ramming where needed and adjusting designs where fighting the rock costs more than working with it.
Acreage Work in Stave Falls, Steelhead and Silverdale
Mission's rural districts combine forest, slope and distance from services, which shapes the jobs: clearing building envelopes out of treed parcels with chipping and haul-off, long gravel driveways from the road to a private building site, trenching water and power runs that can stretch hundreds of metres, and pads for shops, barns and cabins. Older rural properties also carry decades of buried surprises, old water lines, wiring to outbuildings, the occasional forgotten structure, so every job starts with BC 1 Call locates and a careful walk of the property before any digging.
Water, Watercourses and the Rules
Mission's slopes drain through countless creeks and seasonal channels on their way to the Fraser, and many are fish-bearing and protected, with riparian setbacks that limit clearing and excavation near the banks. District permitting also touches steep-slope development, tree removal in some areas, and any significant soil movement. None of this needs to slow a well-planned project: we identify watercourses and permit triggers during the site visit and build the approvals into the schedule, so the machine arrives after the paperwork, not before.
Mission Excavation FAQs
Do you work in rural Mission, like Stave Falls, Steelhead and Hatzic?
Yes, all of Mission is core service area: the downtown slope, the hillside neighbourhoods, and the rural districts of Stave Falls, Steelhead, Silverdale, Hatzic and Dewdney. Acreage and hillside properties out there are exactly the kind of work we are set up for, and there are no travel charges within Mission.
What makes excavation different on Mission hillsides?
Slope changes everything: building sites have to be benched into the hill rather than scraped flat, driveways need workable grades with cross-drainage so they do not erode, cuts must be planned so they are never left open through heavy rain, and retaining walls become part of most projects. Add the shallow rock that surfaces in parts of Mission and machine time runs differently than on valley-floor silt, which is why we quote hillside jobs only after standing on the actual lot.
Can you cut a driveway up to a steep Mission building site?
Yes, hillside driveways are a signature Mission job: route selection to keep grades manageable, benching the road into the slope, cross-culverts and water bars so runoff crosses under rather than down the surface, and coarser rock on the steep pitches to resist erosion. A driveway cut properly the first time costs less than one rebuilt after every atmospheric river.
Do Mission retaining walls need engineering?
The same BC rules apply as everywhere: walls over 1.2 metres generally need a professional engineer and a permit, and shorter walls carrying a driveway or slope above them can too. On Mission grades, walls trend taller and surcharged, so engineering comes up more often here than anywhere else we work. We excavate, drain and backfill to the stamped drawings and coordinate the inspections.
When should hillside work in Mission be scheduled?
Dry season, firmly. We cut hillsides between roughly April and September, get drainage installed while the ground is open, and have slopes stabilized before the October rains arrive. Flat-ground work like clearing, trenching and drainage repairs can run year-round, but an open cut on a Mission slope in November is a risk we simply decline to take.